User's Manual

(feedback)youwanttoensurethatthereisenoughseparationbetween
thedistribution and signalantenna or that they areshieldedfromeach
othertoensurethedistributionantennadoesnotsendasignalbackinto
the signal  antenna. If you cannot achieve these separations, either
choose an alternate location for
 the donor (outdoor) antenna or
determineiftherearenaturalbarriersinthebuildingconstruction itself
that willattenuatesignalsbetweenthe twoantennasso thatoscillation
canbeprevented.
3.4 Runcoaxialcable
Looselyrunthecoaxialcablefromyouroutdoorantennatoyourbooster.
(After you have tested the system you can permanently secure the
coaxialcable).

Asyourouteandpullcabling,followthesegeneralguidelines:
 Bend cables and route them smoothly, and protect the outer skin
againstanydamage.

Keephorizontalcablesstraightandfastenthemwithatieeverythree
tofivefeet.
 Bindandfastenverticalcableseverysixtoeightfeet.
 Waterproofalloutdoorconnectionswithsiliconecaulking
 Be careful when plugging the connector in so as not to damage the