User Manual

downlinksignals
Status ALARM
Green
It is working in linearity
attention: Input signals may be not enough
Red
There are overloading or self-oscillation, strong input signals,
measures shall be taken
Orange
It is working in linearity
Attention: Please adjust MGC to increase the attenuation value, till you
find the “edge point” (I.E. the Alarm LED shall stay at green color, with
intention of turning Orange), and let the repeater work at this point.
Off
Repeater break down

5 UNDERSTANDTHEANTENNA
5.1 Donor(Outdoor)antenna

TheYagiLpdaAntenna
Theyagiisaveryprecisedirectionalantennawithapowerfulreach.This
antennashouldbeinstalledinanelevatedpositionandmustbepointed
towardsyourcarrier’scellulartower.
NOTE:Thisantennaisnotmeanttocapturesignalfrommultiplecarriers.
ThePanelAntenna
Thepanelisadirectionalantennawitha120degreereachandisdesignedto
capturethesignalfrommultiplecarriertowers.Thisantennashouldbe
installedinanelevatedpositionandmustbepointedtowardsyourcarrier’s
cellulartowers.
YagiAntenna
Theyagiisaveryprecisedirectionalantennawithapowerfulreach.This
antennashouldbeinstalledinanelevatedpositionandmustbepointed
towardsyourcarrier’scellulartower.
NOTE:Thisantennacanonlysupportsinglebandsignalbooster.