User's Manual

indoorandoutdoorantennas.
2. Neverpointthefrontoftheyagidonor(outdoor)antennatowardstheinsideof
theserver(outdoor)antenna.
3. Verify that the supplied coaxial cables from both the donor (outdoor) antenna
andtheserver(outdoor)antennaareproperlyconnectedto thecellularbooster
beforepoweringitup.
4.
Carefullypluginthesuppliedpoweradaptorintothebackofthecellularbooster
whereitismarked‘power’andconnecttheotherendtoapoweroutlet.

TheLEDindicatormarkedpowershouldlightupgreen.
3.9 ChecktheCellularBoosterStatus
Your cellular booster comes equipped with electronic sensors designed
to identifycellular signaloverloadoroscillationwhichcan hindersignal
boosting performance. Your cellular booster is specially designed to
automaticallydecreasegaintocompensateforthesecircumstances.The
devicealsohasafeaturetoautomaticallyshutdownincaseofexcessive

oscillation. Improper equipment installation and unusable signal quality
can cause oscillation, this is why it is important to fully understand the
LEDalarmlightsonyourbooster,astheywillhelpyouidentifyandsolve
anypotentialissues.
ThecoloroftheLEDindicatesthestatusoftheboostersystem.
