User's Manual

- 6 -
3. Introduction
Our F10F-CP booster is the perfect solution for providing a wireless improvement in the cellular reception of a
home, office, restaurant, VIP Room, apartment, building or shopping mall, in the quickest time possibly. One
repeater covers 50 to 100 square meters.
This booster has Manual Gain Control (MGC) feature that enables engineers to reduce the gain of the repeater
manually if oscillation is detected or too strong input power level during installation, which will help to get the
best coverage effect without any interference back to mobile network.
And in order to maintain safe and specific output signal levels, this repeater has built-in signal oscillation
detection circuit to adjust the gain automatically so as to avoid interference to the cellular network, also it gets
color changing LED’s indicating its environmental status: the Alarm LED’s located on the front of the unit will
change color from green to orange or red, (depending on the input power level) if the system detects signal
oscillation in either band or, if the input signal is beyond a safe limit.
Our boosters also feature a Network Safe / MUTE feature that automatically shuts off the repeater to protect the
cellular network if no adjustments are made to eliminate alarm readings on the repeater’s LED’s. You will want
to make sure the LED’s remain green at all times for optimum system performance. (This function is not
available for some specific models for which we will specify when you purchase)