User's Manual

- 16 -
9. Booster Installation
9.1. Installation requirement
9.1.1. Installation Location Requirement
1) The booster shall be installed indoor in a cool, dry and ventilated room without erosive gas or smoke, or
a cool and ventilated wall to ensure excellent heat dissipation
2) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
3) Have a set of independent and stable power supply.
9.1.2. Power requirement
Generally it is AC power supply, and the requirement of AC is 100~264VAC / 50±5Hz
9.2. Installation Steps
9.2.1. Installation schemes
The booster shall be installed in indoor areas only
1) Connect the power supply and the cables properly to the booster ports
2) Check again to make sure the repeater is installed firmly and booster alarm LED must stay green.