User's Manual

- 11 -
8. Installation
F10F-CP boosters should be used to cover the indoor area. Humidity and temperature of working environment can
affect the
reliability of booster. So, temperature, humidity, dust , interference, power, space requirements and
other factors should be considered during installation of booster.
8.1. Installation Location Requirement
1) It is appreciated that the booster is installed in a cool, dry and ventilated room without erosive gas and
smoke and without leakage on its proof.
2) Or a cool and ventilated wall of which sun-proof and waterproof is expected.
3) Besides above, common wall, tower or high pole is Ok too.
4) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
5) Have a set of independent and stable power supply.
6) Have lightning conductor in the building, tower or high pole with enough strength or stability.
8.2. Power requirement
Generally it is AC power supply, and the requirement of AC is 90~264VAC / 50± 5Hz
8.3. Installation tools and accessory
No. Name Specification Quantity Remark
1 Plastic Expansion Bolt M5*24 6 Standard accessories
2 Tapping screw M3*27 4
Standard accessories
3 Hanging folder 1
Standard accessories
4 reciprocating drill 1 Engineering-owned, punch the wall
5 Shot bit M3 1 Engineering-owned, punch the wall