User's Manual
boosting the signal at maximum power. When the LED lights begin to
change color from green to orange to red, it means that particular
frequencyisexperiencingsomeoscillation(feedback).
If the oscillation is excessive the booster will shut down for that
particular frequency. The booster will still work for
the other frequency
onamulti‐bandbooster.
Oscillation is caused when the indoor (distribution) antenna sends a
signal back into the outdoor (signal) antenna. Similar to a PA system,
when the microphonegets too close to the speaker it causes feedback.
This will occur if your antennas are too
close together, or the indoor
antenna is pointed at the outdoor antenna. Make sure you have
adequateseparationandsometypeofshieldingbetweentheantennas
(Usuallyyourrooforacementwallisgoodenough).
IMPORTANTNOTE S
The2mostimportantthingstolookforwhensettingupyour
systemis: