User's Manual
2. St a tusandDefinitionofALARMindicators;AlarmLEDonlyworksfor
downlinksignals
Status ALARM
Green
It is working in linearity
attention: Input signals may be not enough
Red
There are overloading or self-oscillation, strong input signals,
measures shall be taken
Orange
It is working in linearity
Attention: Please adjust MGC to increase the attenuation value, till you
find the “edge point” (I.E. the Alarm LED shall stay at green color, with
intention of turning Orange), and let the repeater work at this point.
Off
Repeater break down
5.3 Deviceconnect
Required connection as shown in below figure:
1. Connect the magnet Antenna SMA male to the SMA
female with booster.
2. Plug the smaller one of the car booster into the socket
with DC, and another connect to the car power supply.
3. Connect the chuch antenna SMA male to the SMA
female of the adapter which marked “Signal Adapter”.