User's Manual

marked“indoor”.

Selecttheinstallationlocationofyoursuppliedserver(outdoor)antenna
basedonthefollowing:
OmniCeilingdirectionalantenna
Placeinthecenteroftheareawherethesignalneedstobeamplified.
Paneldirectionalantenna
Placeintheouterperimeteroftheareathesignalneedstobeamplified.

WhipOmnidirectionalantenna
Mountdirectlytotheconnectormarked“indoor” onthecellularbooster.
4.7 Installyourcellularbooster
Install the cellular booster in a location that is properly ventilated and
not exposed to excessive heat, moisture and/or direct sunlight. The
optimalareawouldbeonawalllocatednearapoweroutlet.

Itshouldbemountedinaneasilyaccessibleareasoit’seasytoperform
general maintenance
with the Coaxial Cable & SMA male to N female
Adapterconnections,dipswitchsettingsandpoweradaptor.

Make sure all cables and antennas are securely connected before
commissioningthesystem.