User's Manual

(feedback)youwanttoensurethatthereisenoughseparationbetween
thedistribution and signal antennaor that they areshieldedfrom each
othertoensurethedistributionantennadoesnotsendasignalbackinto
the signal  antenna. If you cannot achieve these separations, either
choose an alternate location for
 the donor (outdoor) antenna or
determineiftherearenaturalbarriersinthebuildingconstructionitself
that willattenuatesignalsbetweenthe two antennasso thatoscillation
canbeprevented.
4.4 Run Coaxial Cable & SMA male to N female
Adapter
Loosely run the Coaxial Cable & SMA male to N female Adapter from
youroutdoorantennatoyourbooster.(Afteryouhavetestedthesystem
youcanpermanentlysecuretheCoaxialCable &SMAmaleto Nfemale
Adapter).

Asyourouteandpullcabling,followthesegeneralguidelines:

Bend cables and route them smoothly, and protect the outer skin
againstanydamage.
 Keephorizontalcablesstraightandfastenthemwithatieeverythree
tofivefeet.
 Bindandfastenverticalcableseverysixtoeightfeet.