User's Manual

7
1080P30
1920*1080
30
2. Video quality
Select video quality based on the need of video recording. High means the best quality, which will
encoding with big bit rate.
3. Video clip
Video clip selection defines the length of each video segment, and this option only is used for
video recording, invalid for audio recording.
Sub-option: Auto, 10 minutes, 20 minutes, 30 minutes; auto means it will create a file in almost
2GB size, and the time is about one hour, depends on the video resolution.
4. Pre-recording
Pre-recording saves an additional seconds of video before the video recording button is pressed,
and the additional seconds is about 30 seconds. After the option of pre-recording is enabled, the
camera can not snapshot, but the snapshot will work during the video recording.
For example, we set the value(between setting the pre-recording and pressing the video recording
button) as X, if X <30s, the camera will store an additional video for X seconds before the video
recording button is pressed, if X>=30s, the camera will store an additional video for 30 seconds
before the video recording button is pressed.
5. Post-recording
Post-recording means how long the camera should continue to record after the video recording
button is pressed to stop recording.
6. Video loop
This function means when the SD card is full, the system will start to overwrite the oldest files
automatically, make sure it can continue recording.
7. Photo pixel
The photo pixel provides options for still image resolution.
8. Snapshot
In preview mode, Long press the snapshot button to shoot the selected number of pictures,
and you can set the option as 1PCS, 2 PCS, 3 PCS, 5 PCS. When video recording is working, the
function will not work; When video recording is working, short press snapshot button can take one
single photo.