ROBOTIC VACUUM CLEANER USER MANUAL (Before using this product,please read the safety instructions below and follow all the routine safety precautions)
FCC warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
)UTZKTZ :L )L 6HWXS ,QVWUXFWLRQV 6DIHW\ ,QVWUXFWLRQV 3URGXFW &RPSRQHQWV 4GSK UL 6GXZY 6XUJ[IZY 9VKIOLOIGZOUTY 6XUJ[IZ LKGZ[XK ,QVWUXFWLRQV IRU 8VH 'ZZKTZOUT 8KSUZK )UTZXURRKX /TYZX[IZOUTY 5VKXGZOTM /TYZX[IZOUTY 3URGXFW 0DLQWHQDQFH 9OJK (X[YN )RKGTOTM GTJ 8KVRGIKSKTZ )RKGTOTM UL *[YZ (U^ GTJ ,ORZKX 3GOTZKTGTIK UL 8URROTM (X[YN )USVUTKTZY 3GOTZKTGTIK UL 5ZNKX )USVUTKTZY &RPPRQ )DXOWV )USSUT ,G
=O ,O 9KZ[V /TYZX[IZOUTY Wi-Fi Setup Instructions 9IGT ZNK 78 IUJK OT ,OM[XK ZU JU]TRUGJ GTJ OTYZGRR Ȕ=K(GIQȕ '66 UX JU]TRUGJ GTJ OTYZGRR LXUS UZNKX '66 YZUXKY ,OM[XK 5VKT 'VV JOXKIZR_ RUM OT OL _U[ NG\K G Ȕ=K(GIQȕ GIIU[TZ! OL TUZ _U[ IGT YKRKIZ Ȕ4K] ;YKXȕ ,UXMKZ 6GYY]UXJ ,OM[XK ,OM[XK ZU YOMT [V GTJ IROIQ UT GLZKX RUMOT 9IGT ZNK 78 IUJK UT ZNK JK\OIK UX ZNK 78 IUJK UT ZNK XOMNZ YOJK UX SGT[GR OTV[Z ZNK 78 IUJK (GXIUJK ZU IUTLOXS ZNK JK\OIK SUJKR Z[XT UT ZNK Ȕ6U]
=O ,O 9KZ[V /TYZX[IZOUTY Wi-Fi Setup Instructions ,OM[XK ,OM[XK ,OM[XK =NKT _U[ YKK ZNK '66 KTZKX OTZKXLGIK ,OM[XK _U[ IGT YZGXZ [YOTM '66 ZU IUTZXUR _U[X 85(5: :GV ZNK JK\OIK ZU KTZKX ZNK SGOT OTZKXLGIK UL '66 ,OM[XK LXUS ZNOY OTZKXLGIK _U[ IGT INUUYK JOLLKXKTZ IRKGTOTM SUJKY GRYU ZU INKIQ ZNK IRKGTOTM VXUIKYY YZGZ[Y :GV ZNK ȔSUXKȕ 1K_ ,OM[XK ZU KTZKX ZNK S[RZO L[TIZOUTGR VGTKR ,OM[XK 5T ZNK JK\OIK SGTGMKSKTZ VGMK IROIQ ZNK H[ZZUT ,OM[XK OT ZNK [VVKX XOMN
9GLKZ_ /TYZX[IZOUT Before using this product,please read the safety instructions below and follow all the routine safety precautions. Please read the instructions carefully and keep them for future reference. Any operation that does not conform to the instructions may cause damage to the product. Safety considerations of Main Body and Accessories Warning 01.Do not disassemble,repair or refit the product without authorization;otherwise it may damage the product or pose a hazard. 02.
9GLKZ_ /TYZX[IZOUT 09.Before using the product,please remove all vulerable items on the floor,such as glass, lamps,and items such as wires and curtains that may entangle with the side brush and suction passages. 10.When the dust box is full,please empty it before using again. 11.Please do not use the robot to clean the construction waste. 12.The operating temperature of the product ranges from 0 degree Celsius to 40 degrees Celsius;please do not use it in a high temperature environment. 13.
9GLKZ_ /TYZX[IZOUT Warning 01. When skin or clothing is exposed to the battery electrolyte,immediately wash with clean water to avoid inflammation of skin,etc. 02. Do not use the rechargeable battery on other devices.This battery is only suitable for this robot. 03. If the battery’s outer box is found to be deformed and expanded,or leakage of electrolytes is found, do not charge or continue to use to avoid danger. 04.
6XUJ[IZ )USVUTKTZY 3.1Name of Parts Main Body Charging Base 2XAAA batteries Remote Controller Power Adapter High-efficient Filter Side Brushes Accessories of some models may be slightly different and they are subject to the actual received products.
6XUJ[IZ )USVUTKTZY Main Body 1.Bumper 2.Control Button 3.WIFI Indicator 4.Laser Components Main Body 1.Universal Wheel 2.Electrode Slice 5. Side Wheel 6.Suction Port 3.Side Brush 7.Dust box 4.
6XUJ[IZ )USVUTKTZY Main Body 1.Power Switch 2.Dust box/Water tank release botton Dust Box 1. Pre-filter 2.High-efficient filter 3.Filter sponge 4.Dust Box 5.
6XUJ[IZ )USVUTKTZY Charging base &KDUJLQJ LQGLFDWRU '& SRZHU MDFN &KDUJLQJ WHUPLQDO
6XUJ[IZ )USVUTKTZY 3.2 Product Specification Structure Diameter of the main body Thickness of the main body Net weigh of the main body 345mm 102mm 3.5kg Electronic Voltage Battery capacity Main body button type 14.
6XUJ[IZ )USVUTKTZY 3.3 Product Characteristics Multiple smart cleaning modes 4 cleaning modes are designed to suit different needs, which can be switched by the remote controller and App, greatly improves the cleaning efficiency and saves 30% of the power. Humanized design It is simple to operate, pressing the Control Button to start cleaning. Follow the Voice Prompt and let the robot start working for you.
/TYZX[IZOUTY LUX ;YK 4.1 Attention When it is working, please help to remove the unfriendly obstacles. Put the furniture and home appliances such as tables and chairs in the house neatly, the robot will clean up smoothly to give you a clean new home. If the robot works at the stairway, the edge of the step, or the entrance to the narrow area among the furniture, etc, please place a fence to ensure it is safe and running smoothly.
/TYZX[IZOUTY LUX ;YK Please do not stand in narrow places such as thresholds and aisles to avoid missing sweeping. When the robot is working, please ensure that the object with the thickness less than 1.8 cm is not placed in the cleaning area to prevent the machine from climbing and jamming. Please pay attention to remove sundries , such as the power cords, toys, etc, which are scattered on the ground may catch or entangle the Robot.
/TYZX[IZOUTY LUX ;YK 4.2 Remote controller instruction Power On/Off Display Screen Plan Cleaning (Smart Cleaning) Return for Auto Charging Confirm Direction Clock Setting Suction Setting Schedule Setting Spot cleaning When the robot is in the vicinity of the charging base and the virtual protection wall, it may not be able to distinguish the instructions issued by the remote controller. if you do not use the remote controller for a long time, please take out the battery.
/TYZX[IZOUTY LUX ;YK Back Button /Press this button and robot will rotate 180 degrees in situ. In the modes of Schedule Setting and Clock Setting, press this button will decrease the number. Left Arrow At the standby mode, press this button to continue turning left, and release it to return to standby mode. At the Schedule setting mode, press this button to switch from minute to hour. Right Arrow At the standby mode, press this button to continue turning right, and release it to return to standby mode.
/TYZX[IZOUTY LUX ;YK 4.3 Operating Instructions Placement of the Charging Base Place the charging base against the wall,leaving the safety distance left and right each 1 meter and front 2 meters. Warning: don’t put it close to the mirror ,avoid direct sunlight. Switch on the robot, then the Control button will turn on the white light, and enter the Selected mode. if the Robot is not activated within 10 minutes, the robot will enter Sleep mode.
/TYZX[IZOUTY LUX ;YK Charging modes Press Return for Auto charging button on the remote controller or Press Recharge icon on App to auto dock the Robot with the charging base. Automatic Recharge This product conforms to European ERP energy consumption standard When Cleaning is completed or the battery is too low,the robot will automatically start finding the charging base to charge itself. Pls keep the charging base in power,otherwise the machine will not be able to find the charging base.
/TYZX[IZOUTY LUX ;YK Charging instruction 01. For the very first operation, please let the robot run out of power. 02. Please charge the robot for 12 hours for the first time of operation. When the charge is done, the Control button light turns off. 03. lf the robot is out of service for a long time, please turn off the power switch. 04. Please charge the robot as soon as possible after the battery is used up. 05. The product can only use the power adapter and charger provided by the factory. 06.
/TYZX[IZOUTY LUX ;YK Pause The pause function is to switch the robot from the operating mode to the selected mode, and the robot can be paused by the following operations: 01.Press the “ ” button on the robot to pause the robot. 02.Press the power on/off button on the remote controller to pause the robot. Notice: After the machine is paused, the machine can be re-operated. Sleep Sleep mode means that the robot is stopped and the indicator light is off.
/TYZX[IZOUTY LUX ;YK Schedule Cleaning You can set the current local time on your robot by pressing the Clock Setting ☆ Once the power switch is turned off, all schedule will be canceled. ☆ Once the schedule setting is succeeded,the robot will start working at the scheduled time everyday Press the"Schedule Setting" button to set the scheduled cleaning time for the robot.(e.g. Setting 6:30 am to the robot, the robot will start cleaning at 6:30am every day at the standby mode.
/TYZX[IZOUTY LUX ;YK ☆ At the Schedule Setting mode,follow the voice prompts to confirm all your operations. 1.Press the Schedule Setting button to enter the Schedule Setting mode and set the schedule on the remote controller or APP. 2.If you need cancel the schedule,just press the Schedule Setting button for 3 seconds.
/TYZX[IZOUTY LUX ;YK Cleaning Modes Plan Cleaning ( S shape Cleaning ) The robot will perform the plan will clean along the cleaning in S shape according to the room environment. Setting Forbidden Area XKYZXOIZKJ GXKG Only available by App control, After setting the forbidden area, the robot will not enter the forbidden area of the room.
/TYZX[IZOUTY LUX ;YK Relocation by LDS on ti aliza Location A Reloc Location B o ed t ov Be m During cleaning, when pause the robot and take it to a new area ,then restart it to resume cleaning, the robot will begin relocation and move to its previous place. Spot cleaning The robot will take its current position as the center and clean a specific spot of your home according to a spiral route.
6XUJ[IZ 3GOTZKTGTIK 5.1 Side brush cleaning and replacement Check the side brush condition from time to time to see if it has been damaged or wrapped with foreign objects. Clean the side brush with a cleaning tool or a rag. When the side brush is damaged and cannot be used, please replace it in time, L and R side brush should be corresponding. 5.
6XUJ[IZ 3GOTZKTGTIK Open dust bin cover, and dump garbage Remove the primary filter
6XUJ[IZ 3GOTZKTGTIK Open the high-efficient filter cover, and remove the high-efficient filter and filter sponge. It is not recommended to wash the high-efficient filter with water. Please put off the debris carefully. Wash the dust box and pre-filter.
6XUJ[IZ 3GOTZKTGTIK 1. Dry the dust bxo and filter components. Keep them dry to ensure a longer service. 2. After the pre-filter is used for 15-30 days, it should be washed once. 3. The maximum service life of the high-efficient filter is 3 months. 1. Reinstall the pre-filter and high-efficient filter in the dust box. 2. Before installing the filter, make sure that the high-efficient filter and the pre-filter are dry. 3. Do not expose the high-efficient filter and the pre-filter to sunlight.
6XUJ[IZ 3GOTZKTGTIK Cover the dust box and fix it into the main body. 5.
6XUJ[IZ 3GOTZKTGTIK Remove the rolling brush and clean off all debris and hair. 5.4 Maintenance of Other Components lectrode slice ensor Use the cleaning tools or a dry soft cloth to periodically clean the electrode slice of robot chassis and the sensor window.
6XUJ[IZ 3GOTZKTGTIK Charging terminal Use a cleaning tool or soft cloth to clean the charging terminal
)USSUT ,G[RZY 6.1 Faults Description Faults The robot can not be charged. The robot is stuck during work. The robot goes back to recharge without finishing the cleaning work. Possible Reasons The electrodes between the main body and the charging base are not contacted properly. Make sure that the electrodes between the main body and the charging base are properly contacted. The charging base is switched off while the robot is switched on,which leads to the loss of power.
)USSUT ,G[RZY 6.
