User's Manual

扫地机

当前位置

扫地机搬

动后位置

断点续扫

导航到断点

导航回充

Instructions for Use

Relocation

During the cleaning process,

move the robot after the suspension,

when restart, the robot will

seek relocation

Resume

During cleaning process, the robot will

back to charging base automatically

After fully charged, the robot will back to

the place where it stopped before and

continuing cleaning

Laser Relocation

In a single room, when the robot moves for a few rounds(at least one round), the laser module

will establish the map of current environmental, if you suspend the robot at this time and move

it, after putting down the robot, press the start button, the robot will report the "positioning" voice,

and it will start rotating to seek relocation. If the relocation is successful, the robot will report the

voice“successful relocation, continue to plan cleaning”. If the relocation fail, the robot will report

"enter into new district, star new plan cleaning”, at the same time, the robot will clear all previous

states.

Resume

During the cleaning process, the robot will back to the charging base automatically if the battery

power is lower than 20% capacity. After fully charged, the robot will back to the place where it

stopped before and continuing cleaning