ROBOTIC VACUUM CLEANER USER MANUAL (Before using this product,please read the safety instructions below and follow all the routine safety precautions)
Content 1. Wi-Fi Setup Instructions 2.Safety Instructions 3.Product Components 3.1 Name of Parts 3.2 Products Specifications 3.3 Product feature 4. Instructions for Use 4.1 Attention 4.2 Remote Controller Instructions 4.3 Operating Instructions 5. Product Maintenance 5.1 Side Brush Cleaning and Replacement 5.2 Cleaning of Dust Box and Filter 5.3 Maintenance of Water Tank Components 5.4 Maintenance of Rolling Brush Components 5.5 Maintenance of Other Components 6. Common Faults 6.1 Common Faults 6.
Wi-Fi Setup Instructions Wi-Fi Setup Instructions Scan the QR code in Figure 1 to download and install “WeBack” APP, or download and install from other APP stores. Figure 1 Open App, directly log in if you have a “WeBack” account; if not, you can select “New User” Forget Password Figure 2 Figure 3 to sign up, and click on " " after login.
Wi-Fi Setup Instructions Wi-Fi Setup Instructions Figure 5 Figure 6 When you see the APP enter interface Figure 5,you can start using APP to control your ROBOT.Tap the device to enter the main interface of APP (Figure 5), from this interface you can choose different cleaning modes, also to check the cleaning process/status. Tap the “more” Key(Figure 6) to enter the multi-functional panel (Figure 7).
Safety Instruction Before using this product,please read the safety instructions below and follow all the routine safety precautions. Please read the instructions carefully and keep them for future reference. Any operation that does not conform to the instructions may cause damage to the product. Safety considerations of Main Body and Accessories Warning 01.Do not disassemble,repair or refit the product without authorization;otherwise it may damage the product or pose a hazard. 02.
Safety Instruction 09.Before using the product,please remove all vulerable items on the floor,such as glass, lamps,and items such as wires and curtains that may entangle with the side brush and suction passages. 10.When the dust box is full,please empty it before using again. 11.Please do not use the robot to clean the construction waste. 12.The operating temperature of the product ranges from 0 degree Celsius to 40 degrees Celsius;please do not use it in a high temperature environment. 13.
Safety Instruction Warning 01. When skin or clothing is exposed to the battery electrolyte,immediately wash with clean water to avoid inflammation of skin,etc. 02. Do not use the rechargeable battery on other devices.This battery is only suitable for this robot. 03. If the battery’s outer box is found to be deformed and expanded,or leakage of electrolytes is found, do not charge or continue to use to avoid danger. 04.
Product Components 3.1Name of Parts Main Body Charging Base 2XAAA batteries Remote Controller Power Adapter Cleaning Tool Water Tank Component Side Brushes High-efficient Filter Mop Accessories of some models may be slightly different and they are subject to the actual received products.
Product Components Main Body 1.Bumper 2.Control Button 3.WIFI Indicator 4.Laser Components Main Body 1.Universal Wheel 2.Electrode Slice 5. Side Wheel 6.Suction Port 7 3.Side Brush 7.Dust box 4.
Product Components Main Body 1.DC Power Jack 2.Power Switch 3.Dust box/Water tank release botton Dust Box 1. Pre-filter 2.High-efficient filter 3.Filter sponge 8 4.Dust Box 5.
Product Components Water Tank Component 1.Tank sealing cap 2.Water tank 3.Mop Charging base 1.Charging indicator 2.DC power jack 9 3.
Product Components 3.2 Product Specification Structure Diameter of the main body Thickness of the main body Net weigh of the main body 330mm 101mm 3.1kg Electronic Voltage Battery capacity Main body button type 14.8V 2600mAh LED button Accessory Water tank capacity Dust box capacity Cleaning cloth（polyester cotton） 350ml 600ml 295X100X4mm Process Parameters Charging Type Operating Duration Charging duration 10 Manual/Automatic Approx.
Product Components 3.3 Product Characteristics Multiple smart cleaning modes 4 cleaning modes are designed to suit different needs, which can be switched by the remote controller and App, greatly improves the cleaning efficiency and saves 30% of the power. Humanized design It is simple to operate, pressing the Control Button to start cleaning. Follow the Voice Prompt and let the robot start working for you.
Instructions for Use 4.1 Attention When it is working, please help to remove the unfriendly obstacles. Put the furniture and home appliances such as tables and chairs in the house neatly, the robot will clean up smoothly to give you a clean new home. If the robot works at the stairway, the edge of the step, or the entrance to the narrow area among the furniture, etc, please place a fence to ensure it is safe and running smoothly.
Instructions for Use Please do not stand in narrow places such as thresholds and aisles to avoid missing sweeping. When the robot is working, please ensure that the object with the thickness less than 1.8 cm is not placed in the cleaning area to prevent the machine from climbing and jamming. Please pay attention to remove sundries , such as the power cords, toys, etc, which are scattered on the ground may catch or entangle the Robot.
Instructions for Use 4.2 Remote controller instruction Power On/Off Display Screen Plan Cleaning (Smart Cleaning) Return for Auto Charging Confirm Direction Suction Setting Clock Setting Edge Cleaning Schedule Setting When the robot is in the vicinity of the charging base and the virtual protection wall, it may not be able to distinguish the instructions issued by the remote controller. if you do not use the remote controller for a long time, please take out the battery.
Instructions for Use Plan Cleaning button No matter what mode the robot is in, this button will bring it to the plan cleaning mode. Return for Auto Charging Pressing this button to shift the mode as recharging, and the logo will be displayed on the screen of the remote controller. Forward /+ At the standby mode, press this button to continue moving forwards, and release it to return to standby mode. At the Schedule setting mode, press this button to increase the number.
Instructions for Use 4.3 Operating Instructions Placement of the Charging Base Place the charging base on the flat floor and against the wall. Do not place any objects Switch on the robot, then the Control button will turn on the white light, and enter the Selected mode. if the Robot is not activated within 10 minutes, the robot will enter Sleep mode.
Instructions for Use Charging modes Please keep the power switch turned on before charging the machine. Charge mode A Fix the charging pin into the DC power jack of the robot and plug in the power supply. Charge mode B: Press Return for Auto charging button on the remote controller or Press Recharge icon on App to auto dock the Robot with the charging base.
