User's Manual

12
The device provides special adapter cable, including interface of network, serial, USB and power;
RS232 interface is for short distance communication (less than 5m), through the DB9 connector and the
PC serial port connection to realize the communication of PC and the device.
RS485 interface used for long distance serial communication (less than 80m)
RJ45 network port used for long distance communication (less than 80m), connect PC with extend
cable.
3.4 Device installation
The reading and writing range of the reader depends on the on-site application, the tilt angle of the antenna
is adjusted to achieve the best reading and writing performance.
3.5 Acceptance
Mainly from two aspects of acceptance criteria: structure and performance.
3.5.1 Acceptance of structure
Check below details:
 Whether reader is fixed firmly, without loose;
 Whether the cable connected firmly ;
 Whether the screws are tighten
3.5.2 Performance acceptance
 Whether the reader is working properly;
 Whether the read and write range is reasonable.