User's Manual

11
3. Installation
3.1 Notes
To ensure the normal and stable operation of the device and your personal property and safety, please
carefully read the following notes before install CL7206B8A reader:
1. Firstly, check whether the power socket ground terminal is connected to the ground, and to see whether
the local power supply voltage is in accordance with the applicable voltage range of the reader;
2. Check the device and the external connection if is closely connected;
3. Pay attention to the type selection and the length limit of the cable and the serial line:
Network cable connects directly, no longer than 80 meters
R485 cable connects directly, no longer than 80 meters
Serial line connects directly, no longer than 5 meters
4. When installing several readers, the antenna position and the antenna spacing should be appropriate to
avoid interference with each other.
3.2 Installation conditions
Before installing the reader, please carefully check if the product is in good condition, the accessories are
complete or not, if there is any damage, please contact the supplier.
3.3 Device connection
3.3.1 Power on
Insert the power cord into the AC power supply socket and plug another end into the power connector
of the device and tighten.
Turn on and wait about 12 seconds, the system initialization process is completed and is standby state.
3.3.2 PC connection