User's Manual

40
2. Number: the number of this account.
3. User account: the account of dial dial-up server not WAP gateway.
4. Password: the password of dial-up server not WAP gateway.
5. Line: select line type by analog or figure.
6. Speed: select proper transmission speed.
7. Network domain: IP address.
- GPRS data:
Select one account to enter:
1. Name: the name of the account. You can select edit to change it.
2. GPRS connection point: input APN.
3. User account: the account of dial dial-up server not WAP gateway.
4. Password: the password of dial-up server not WAP gateway.
5. Authorization mode: select the cipher mode of the authorization.
3.17 Additional function
3.17.1 Calculator
Your phone supplies you a calculator with four basic functions with which you can do simple calculation.
Select one the options of calculator and press OK to enter.
- Input the figures to be calculated in the interface at the touchable screen.
- Or input figures by 0-9 numeric keys.
- Press the right soft key to clear latest input or result one by one and press the right soft key to exit the calculator
and press the left soft key to confirm the calculation result.
Note: please understand us for the rounding error for a limited precision of the calculator.
3.17.2 Unit Conversion
Your phone offers you unit conversion function with which you can converse the units including weight units and length
units conveniently
- Weight: there are two kinds of weight unit conversions including kilogram <－> pound and
kilogram <－> ounce. Input the figures to be conversed in the corresponding edit box and press
left soft key to confirm, then the value you want will be displayed in another edit box.
- Length: there are four kinds of length unit conversion including kilometer<－>mile, meter <－
>yard, meter <－>feet and centimeter <－>inch. Input the figures to be conversed in the
corresponding edit box and press left soft key to confirm, then the value you want will be
displayed in another edit box.
3.17.3 Exchange Rate Conversion
To carry put exchange rate conversion, you should input exchange rate first and then input native or foreign monetary
value and press left soft key to confirm, then the value you want will be displayed in another edit box.