User's Manual

- System Preset: Whether the number sending uses the system default value.

- Hide Number: The other party will not see the number when you calling. (Needed to be supported by the operator)

- Send Number: The other party can see the number when you calling.

g Call Waiting:

Note: This function is not supported by card B.

Turn on or off the call waiting function. Select View to view the current call waiting status.

g Call Transfer:

Note: This function is not by card B.

- Unconditional Transfer: After turning on Unconditional Transfer, and the incoming calls in any state will be

transferred to your set number.

- Transfer if unreachable: After turning on Transfer if not unreachable, and the phone will transfer the incoming call to

your set number when the other party cannot contact you.

- Transfer on no answer: After turning on Transfer on no answer, and the phone will transfer the incoming call to your

set number when no answer.

- Transfer on busy: After turning on Transfer on busy, and the phone will transfer the incoming all to your set number

when busy.

- Transfer all data calls: When the incoming call is a data call, and the phone will transfer it automatically.

- Cancel Transfer: Cancel all the call transfer.

g Call Barring:

Note: This function is not supported by card B.

Take restriction for dialing calls.

- Outgoing Calls Barring: Restrict the outgoing calls.

- Incoming Calls Barring: Restrict the incoming calls.

- Cancel Barring: Cancel the set barring (required to input the password).

- Change Password: Change the password.

g Line Switch:

Note: Card B is only available for line 1.

Select line 1 or line 2.

g Call Duration Prompt:

Note: This function is not supported by card B.

The phone will sound the prompt tone when reaching to the time after setting the frequency.

g Call Duration Display: Display the call duration, select “Off’ will not display the call duration.

g Auto Redial

Note: This function is not supported by card B.

The phone will redial automatically for every unsuccessful calling after turning on Auto Redial.