User's Manual

the battery, phone and charger will be heated slightly during charging.

 Disconnect the mobile phone and charger with AC electrical plug

once the battery is fully charged.

Note:

 Always keep the battery in ventilated place with the temperature from

＋5℃ to ＋40℃ during charging, and make sure to use the charger

provided by manufacturer. It may cause danger once unapproved

charger is used and it may invalidate any approval or warranty.

 If the phone switches off automatically or there’s “Low Battery”

displayed on the phone, please charge to the battery as quick as

possible. The phone will reduce charging time automatically if the

battery power isn’t used up before charging.

 The duration of standby time and duration of talk time offered by

manufacturer are based on ideal working environment. In actual use,

however, the working time of battery changes based on network

condition, working environment and using way.

g Make sure that the battery is installed properly before charging and

it’s forbidden to remove the battery during charging.

g Please disconnect the charger and phone with power once charging

is over.

g If you don’t disconnect the charger with power and phone, the

phone begins charging again when the power loss reaches certain

extent after overcharging lasts for quite a long time (about 5 – 8

hours). We suggest you don’t do this, as it will influence the

performance and lifetime of the battery

2.5 Connecting to network

2.6.1 SIM card

Make sure that you’ve inserted available SIM card to the phone before

your use. SIM card is the key to enter digital GSM network.

All information related with establishing network connection and calling

record initiate are saved in metal area in SIM card. Meanwhile, there’re

other information saved in the SIM card, including name and phone

number saved in phone book and SMS. The SIM card can be removed

from your phone and inserted to any GSM phone (the new phone will

read SIM card automatically).

Never touch metal area the SIM card to avoid information loss or

damaging the card. Keep SIM card far away from electricity and magnet.

You can’t enter GSM network once the SIM is broken.

Warning: Do switch off the phone before removing SIM card. It’s

forbidden to insert or remove SIM card if the phone is connected to

external power, or else, the SIM card will be damaged.