User's Manual

77
Activate the feature and set filtered numbers to
prevent messages from those numbers.
g Remote control
When your mobile phone is not at your side, you
may perform remote control by sending messages to it
via other phone numbers:
Note: To access the remote control settings, the
factory password setting is 0000 by default. You may
change it into your own password.
First, Remote control setting: You are allowed to
select
1 Remote power-off
2 Call divert
3 Phone lock
4 Disk formatting
5 Forwarding messages
6 Sending business cards
Note: 1. Only when you select a certain feature, can
the remote control feature be valid.
2. Call divert requires network service.
Second, Set controlling number: You may choose
any number or a specific number as the remote control
number
1 Any number (You may send remote control
messages to your mobile phone via any number)
2 Specific numbers (The remote control messages
are sent to your mobile phone via a specific number)
Third, Change password: Change the factory default
password used to access remote control settings