User Manual

Overview & Controls
LED Indicators
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
Features
• Supports Bluetooth
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable
lithium ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
Includes
Battery Power
Initial charge time is approximately 2 hours.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge the
unit. Charge fully before use.
Pull earplugs apart to
begin playing audio.
Connect earplugs to
pause audio.
If your device should become unpaired, or you nd it
is unable to connect normally, repeat the steps below.
1. Press and hold the Play/Pause/Speakerphone/
Pair button for 4 seconds. to power on and
begin pairing. When pairing, remain within 3 feet
of the unit.
2. Using the controls on your Bluetooth device,
select SAEB16 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 .
3. Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit will
stay paired unless unpaired manually by the user, or
erased due to a reset of the device.
4. Use the controls on the connected Bluetooth
device to select and begin playing an audio.
Audio played from the connected Bluetooth
device should now be heard through the unit.
5. To play or pause audio, press the Play/Pause
button, or use the controls on the connected
Bluetooth device.
Pairing Bluetooth & Playing Audio Using the Speakerphone
Magnetic Play/Pause Feature
1. To accept a call, press the Speakerphone button,
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or
use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.
DC Power Input
Use with USB charging cable
(included).
Volume Up
Power / Pair / Play /
Pause /Speakerphone
Press and hold to power
ON or OFF.
Press to play or pause audio.
Press to answer incoming
phone call.
Volume Down
Microphone