User's Manual

Overview & Controls
Indicator LED
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• On ear controls
• Built-in microphone
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
• Carry pouch
Includes
Battery Power
Initial charge time is
approximately 2 hours.
Charge fully before use.
1. Using a Micro-
USB to USB cable
(included), connect
to the USB port
of a powered on
computer or USB
power adaptor (not
included) to charge
the unit.
If your device should become unpaired, or you nd it
is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the
Play/Pause/Speakerphone/Pair button for
4 seconds. When pairing, remain within 3 feet of
the unit.
2. Using the controls on your Bluetooth device,
select SAEB26 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 .
3. Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit
will stay paired unless unpaired manually by the
user, or erased due to a reset of the device.
Pairing a Bluetooth Device Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
device to select and begin playing an audio
track. Audio from the connected Bluetooth device
should now be heard through the earbuds.
2. To play or pause audio, press the Play/Pause
button, or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button,
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or
use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.
Power / Pair / Play /
Pause /Speakerphone
Press and hold to power
ON or OFF.
Press to play or pause audio.
Press to answer incoming
phone call.
Indicator LED
DC Power Input
Use with USB charging cable
(included).
Volume Up/Down
Microphone