User's Manual

Overview & Controls
LED Indicators
Status Indicators
Power On Flashing blue light
Low Battery Flashing red light
Charging Red light
Finished Charging Blue light
Pairing Wireless Flashing red and blue lights
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Built-in microphone
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
• Drawstring bag
Includes
Battery Power
Initial charge time is approximately 2 hours. Charge
fully before use.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not included)
to charge the unit.
If your device should become unpaired, or you nd it
is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the
Play/Pause/Speakerphone/Pair button for 4
seconds. When pairing, remain within 3 feet of
the unit.
2. Using the controls on your Bluetooth device,
select IAEB06 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password 0 0 0 0 .
3. Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit
will stay paired unless unpaired manually by the
user, or erased due to a reset of the device.
Pairing a Bluetooth Device Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
device to select and begin playing an audio
track. Audio from the connected Bluetooth device
should now be heard through the earbuds.
2. To play or pause audio, press the Play/Pause
button, or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button,
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button, or
use the controls on the connected phone.
3. To re-dial the last dialed number, press
the Speakerphone button twice.
Volume Up
Microphone/Indicator
Light
Power / Pair / Play /
Pause /Speakerphone
Press and hold to power
ON or OFF.
Press and hold for 4 seconds
to turn the unit on and begin
pairing.
Press to play or pause audio.
Press to answer incoming
phone call.
DC Power Input
Use with USB charging
cable (included).
Volume Down