User manual

H7921-RHZ-i 3G Router User Manual
49
【Gateway】: Configure the next IP address of this static route, namely the port address
of the neighboring router.
【Interface】: Specify the interface on which the static route acts.
3.3.7.3 RIP configuration (Optional)
In the “Forward” main tab, click the “RIP” sub-tab to set the dynamic route parameters:
RIP, and go to the following configuration interface:
Fig. 3.3.7.3: RIP Configuration Interface
You may add a network or neighbor by click “Add” icon.
3.3.7.4 OSPF configuration (Optional)
In the “Forward” main tab, click the “OSPF” sub-tab to set the dynamic route
parameters: OSPF, and go to the following configuration interface: