User manual

H7921-RHZ-i 3G Router User Manual

Click the “Add” to go to the following configuration interface:

Fig. 3.3.7.1-2: NAT&DMZ Setting Interface

【Select】: Select which data forward rule to be added.

1. Route mode setting

Select the “Route Mode” option to go to the following configuration interface:

Fig. 3.3.7.1-3: NAT&DMZ Setting Interface

Route Mode configuration parameters include:

【 Interface 】 :On selected interface, the source IP of packets pass through

H7921-RHZ-iwould not be replaced to H7921-RHZ-i’s IP, the destination machine can

see the source IP directly.

Note:

Normally you may not need this option except for some certain application.

2. DMZ setting

Select the “DMZ” option to go to the following configuration interface: