User manual

H7921-RHZ-i 3G Router User Manual
45
circumstance to constitution Interface, Local Subnet, Peer Subnet, the
Encrypt Type, Authorization, the related parameter of Password etc., be you
usage static state ip address, Local ID and Peer ID don't fill.
3.3.7 Forward
When you click the “Forward” tab, the following sub-tabs appear on the page:
 NAT & DMZ
 Static Route
 RIP (optional function in H7921-RHZ-i)
 OSPF (optional function in H7921-RHZ-i)
Fig. 3.3.7: Forward Tab
3.3.7.1 Nat & DMZ configuration
In the “Forward” main tab, click the “NAT&DMZ” sub-tab to set the route mode, NAT
and DMZ functions and go to the following configuration interface:
Fig. 3.3.7.1-1: NAT&DMZ Setting Interface
NAT&DMZ configuration parameters include:
【NAT/NAPT Services】: Set whether enable NAT/NAPT function: Enable/Disable.
【DMZ Services】: Set whether enable DMZ function: Enable/Disable.