User manual

H7921-RHZ-i 3G Router User Manual
28
【LCP Echo Interval】: Set LCP’s maximum interval time, in second.
【LCP Echo Failure】: Set LCP’s maximum request times.
【MTU】: Set the number of bytes of the maximum transfer unit.
【MRU】: Set the number of bytes of the maximum receive unit.
【local IP】: Set the local IP address.
【Remote IP】: Set the remote terminal’s IP address.
【Other Options】: Users can define their own options here.
3.3.2.2 Internet Connection Type configuration
In the “Internet” main tab, click the “Internet Connection Type” sub-tab to set the
internet connection type. Select the internet connection type from the “Connection
Type” drop-down menu: “Modem” and “Custom”. Below, we will describe the
configuration in different modes:
1. Modem configuration
When internet access is realized by Embedded Modem, you need to select the “Modem”
option and go to the following configuration interface:
Fig. 3.3.2.2: Modem configuration Interface
【DNS Customize】: Set whether configure the DNS server address manually:
Enable/Disable.
【DNS1】: Set IP address of the primary DNS server.
【DNS2】: Set IP address of the standby DNS server.
【VPN Route Type】: Set whether all the packets will pass through VPN even the access
to the Internet.
2. Custom configuration
This mode is used for debugging; customers do not need it normally.
3.3.3 Local network
When you click the “Local Network” tab, the following sub-tabs appear on the page:
 LAN