User manual

H7921-RHZ-i 3G Router User Manual

2.1.3.2 Wiring

RJ-45 - Ethernet interface

Standard 10/100BaseT Ethernet switch port, self-adaptive

DC - power supply interface, Galaxy H7921-RHZ-i 3G router’s power supply is generally

+12VDC

ANT - antenna interface

The standard 5OΩ/SMA RF connector (female) is applied. In the environment of some

industrial applications, the lightning protection measures should be taken. You can

install the lightning protection device between this connector and antenna.

Note:

1. Keep this product away from any heating source;

2. Don’t place this product in dusty or humid environment;

3. Keep it away from some possible interference sources such as metal wall,

microwave oven etc;

4. To ensure that Wi-Fi network signal is received well, please pay attention to the

position and the angle of antenna. Don’t place antenna inside the shielded metal

case.

2.2 Function and features

Galaxy series 3G mobile data communication terminal product features platform and

modularization design. Upon the different demand from the users, the platform

extension, modem combination and clipping are carried out to comply with various

application demands of different clients. Combination of Broadcom hardware platform

with Linux-based GOS (Galaxy Operation System) software platform is its core

advantage.

The features of full-function Galaxy 3G mobile data communication terminal product

include:

2.2.1 Hardware function

 SYSTEM, NET, LAN indicators

 Factory default configuration restoration button

 Antenna interface: 50Ω/SMA negative end

 Serial data interface (DB9): RS-232(DCE)

 Serial data interface rate: 300 to 230,400 bits/s

 Ethernet interface: one 10/100BaseT/RJ45 self-adapting

 Configuration interface: WEB/Telnet or RS-232