User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration

Fig. 3.3.8.2: System Log Management Interface

The system log configuration parameters include:

【Local Log Status】: Set whether enable local log function: Enable/Disable.

【Remote Log Status】: Set whether enable remote log function: Enable/Disable. After

this function is enabled, the router will send the log information to the configured

remote PC.

【Remote IP】: Set the IP address of the remote server, generally the IP address of the

PC that receives the log information.

【Remote Port】: Set the port number of the remote server.

After the configuration according to your specific needs, you can carry out the following

operations to the configuration result:

【Save】: Save the settings.

【Cancel】: Cancel the unsaved configuration.

【Refresh】: Refresh the information on the page.

Note:

For the success of remote log receive, the remote log server must be started.

3.3.8.3 System clock

In the “System Tools” main tab, click the “Clock” sub-tab to set the system’s clock

function. Time Synch. Type option is the method to synchronize the system time: NTP

and Manual.

Select the Manual to set the time manually.

Select the NTP to go to the following configuration interface: