User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
52
NAT configuration parameters include:
【Name】: Set the name mapped by NAT port.
【Protocol】: Set the protocol mapped by NAT port.
【Outside Interface】: Select the interface on which NAT function acts.
【Outside Port】: Set the outside port number mapped by NAT port.
【Inside Address】: Set the IP address of LAN host mapped by NAT port.
【Inside Port】: Set the port number of LAN host mapped by NAT port.
After the configuration according to your specific needs, you can carry out the following
operations to the configuration result:
【Save】: Save the settings.
【Return】: Return to the previous page.
3.3.7.2 Static route configuration
In the “Forward” main tab, click the “Static Route” sub-tab to set the static route
parameters and go to the following configuration interface:
Fig. 3.3.7.2-1: Static Route Configuration Interface
The configuration parameters include:
【View Route Table】: View the current system’s route table.
【Add】: Add new static routes.
【Refresh】: Refresh the information on the page.
To add the static route, click the “Add” button and go to the following configuration
interface: