User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
51
Fig. 3.3.7.2-4: DMZ Setting Interface
DMZ configuration parameters include:
【Outside Interface】: Set the interface on which the DMZ function acts.
【Inside Address】: Set the IP address of the host assigned by DMZ record.
After the configuration according to your specific needs, you can carry out the following
operations to the configuration result:
【Save】: Save the settings.
【Return】: Return to the previous page.
3. NAT setting
To configure the NAT function, you need to go to the following configuration interface:
Fig. 3.3.7.2-5: NAT Setting Interface