User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration

Fig. 3.3.7.1-2: NAT&DMZ Setting Interface

【Select】: Select which data forward rule to be added.

1. Route mode setting

Select the “Route Mode” option to go to the following configuration interface:

Fig. 3.3.7.1-3: NAT&DMZ Setting Interface

Route Mode configuration parameters include:

【Interface】:On selected interface, the source IP of packets pass through H8951would

not be replaced to H8951’s IP, the destination machine can see the source IP directly.

Note:

Normally you may not need this option except for some certain application.

After the configuration according to your specific needs, you can carry out the following

operations to the configuration result:

【Save】: Save the settings.

【Return】: Return to the previous page.

2. DMZ setting

Select the “DMZ” option to go to the following configuration interface: