User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
49
In the “Forward” main tab, click the “NAT&DMZ” sub-tab to set the route mode, NAT
and DMZ functions and go to the following configuration interface:
Fig. 3.3.7.1-1: NAT&DMZ Setting Interface
NAT&DMZ configuration parameters include:
【NAT/NAPT Services】: Set whether enable NAT/NAPT function: Enable/Disable.
【DMZ Services】: Set whether enable DMZ function: Enable/Disable.
After the configuration according to your specific needs, you can carry out the following
operations to the configuration result:
【Add】: Add new rules.
【Del】: Delete the set rules.
【Save】: Save the settings.
【Refresh】: Refresh the information on the page.
Click the “Add” to go to the following configuration interface: