User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
46
After each configuration according to your specific needs, you can carry out the
following operations to the configuration result:
【Add】: Add new L2TP setting.
【Refresh】: Refresh the information on the page.
Click the “L2TP” tab; the following sub-tabs appear on the page:
Fig. 3.3.6.1-2: L2TP Setting Interface
L2TP configuration parameters include:
【Name】: Set a name for this L2TP connect.
【Status】: Set whether enable this L2TP: Enable/Disable.
【Server IP or Domain】: Input Server IP or Domain of the VPN service provider.
【User Name】: Set the user name provided by the VPN SP.
【Password】: Set the password provided by the VPN SP.
【PPP Configures】: Please see Chapter 3.3.2.1 as a reference.
After each configuration according to your specific needs, you can carry out the
following operations to the configuration result:
【Save】: Save the settings.
【Return】: Return to the previous page.
3.3.6.2 PPTP configuration