User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
43
Fig. 3.3.5-1: Filter Setting Interface
The configuration parameters include:
Firewall Service: Set whether enable firewall function: Enable/Disable.
Default Action: Set the default action of the firewall: “Accept” means the router
accepts other packets by default; “Drop” means the router drops other packets by
default.
PING Accept: Set whether allow PING router from outside.
Remote HTTP Access: Set whether enable the remote WEB management function.
The following buttons can be used to add or delete the firewall rules:
Edit: Edit the set firewall rules.
Del: Delete the set firewall rules.
After each configuration according to your specific needs, you can carry out the
following operations to the configuration result:
Add: Add new firewall rules.
Save: Save the settings.
Cancel: Cancel the unsaved configuration.
Refresh: Refresh the information on the page.
Click the “Add” to go to the following configuration interface:
Fig. 3.3.5-2: Filter Setting Interface
You can choose filter type here: IP filter rules or MAC filter rules.
Select the “IP Filter” to go to the following configuration interface: