User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
37
Fig. 3.3.3.4: DHCP Configuration Interface
The configuration parameters include:
【DHCP Server】: Set whether enable the DHCP server function: Enable/Disable.
【IP Address Range】: Set the range of the DHCP dynamic address pool.
【DHCP Reservation】: Set the IP address assigned to the client manually. Click the
“IP-MAC Mapping” button to link to the Static DHCP page.
【Network Mask】: Set the subnet mask of the IP address assigned by DHCP
dynamically.
【Client Lease Time】: Set the lease time, namely the time that the client uses the
assigned IP address.
【Gateway】: Set the gateway to client assigned by DHCP: Default, Static, as same as
router’s gateway.
【DNS】: Set the DNS server’s address: Default, Static, as same as router’s DNS.
After each configuration according to your specific needs, you can carry out the
following operations to the configuration result:
【Save】: Save the settings.
【Cancel】: Cancel the unsaved configuration.
【Refresh】: Refresh the information on the page.
3.3.3.5 Static DHCP configuration
In the “Local Network” main tab, click the “Static DHCP” sub-tab to set the DHCP server
parameters and go to the following configuration interface: