User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration
34
Fig. 3.3.3.2: Wi-Fi Basic Configuration
【Wireless Status】: Set whether enable the wireless network function: Enable/ Disable.
【Wireless Mode】: Select the wireless network mode: AP by default.
【Wireless Network Mode】: Set the wireless network’s protocol standard: “B-only” is
802.11b standard; “G-only” is 802.11g standard; and “Mixed” is automatically
compatible with these two standards.
【Wireless Network Name (SSID)】: Set the network name shared by all access points
in the wireless network. SSID must be unique in the wireless network.
【Wireless Channel】: Select the wireless channel. When you select one proper wireless
channel from the drop-down list, the router will broadcast in the selected channel.
【Wireless Broadcast Status】: Set whether enable the wireless network’s broadcast
function: Enable/Disable.
After the configuration according to your specific needs, you can carry out the following
operations to the configuration result:
【Save】: Save the settings.
【Cancel】: Cancel the unsaved configuration.
【Refresh】: Refresh the information on the page.
3.3.3.3 Wi-Fi Security configuration
In the “Local Network” main tab, click the “Wi-Fi Security” sub-tab to set the Wi-Fi’s
security function and go to the following configuration interface: