User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration

Fig. 3.3.2.1-1: Mobile Network

【Auto-Dialup】: Set the account number of 3G network service provided by ISP.

【Module Modem Chat Script】: Set the dial-up script chatting with Module Modem.

Select the “Customize”, and enter the dial-up script chatting with Module Modem in the

input box. Normally you may select”Default”.

【Service Code】: Set the name of 3G network service provided by ISP.

【APN】: Set the APN of the internet access service provided by ISP.

【User Name】: Set the account number of 3G network service provided by ISP.

【Password】: Set the password of account number of 3G network service provided by

ISP.

【Module Modem Initial Script】: Set the initial script of Module Modem dial-up. Select

the “Customize”, and enter the initial script of Module Modem dial-up in the input box.

Normally you may select”Default”.

【Advanced setting】: Configure advanced parameter by dialing protocol.

Note:

“Embedded Modem” & “Module Modem” both mean the Modem embedded in H8951.

In the “Advanced setting” tab, it contains “PPP Advanced Settings” & “Internet

Connection Type Settings”, the interface of “PPP Advanced Settings” is as below: