User manual

H8951 3G SOHO Router User Manual Chapter3: Router Configuration

After the configuration is completed, click the “Add”. By now the computer has a route

to Galaxy H8951.

Note:

As shown in Fig. 3.2-3, “Default gateway” depends on whether the configuration

computer connects with Internet through original local network configuration. If

Internet is accessed through original local network, the default gateway setting does

not need to be modified; if Galaxy H8951 3G SOHO Router + is used, you need to

modify the default gateway and configure it as Galaxy H8951 3G SOHO Router’s default

LAN IP address 192.168.8.1.

2. Network check

 Step 1: IP configuration check

Use the command of ipconfig to check whether the IP address is correctly set or added.

You can enter DOS mode and key-in command: ipconfig, for instance:

C:\>ipconfig

Windows IP Configuration

Ethernet adapter local connection:

Connection-specific DNS Suffix. :

Auto configuration IP Address . . .: 192.168.8.7

Subnet Mask . . . . . . . . . . .: 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.8.1

 Step 2: connectivity check

After the configuration is completed, you can check the connectivity between it and

Galaxy H8951 3G SOHO Router by ping command. Key-in ping command in system

command line:

Ping 192.168.8.1

If the following information appears:

Pinging 192.168.8.1 with 32 bytes of data:

Reply from 192.168.8.1: bytes=32 time=2ms TTL=64

By now, it means that the configuration computer has been connected to the router. You

can carry out configuration operation on it.

3.2.4 System login

Open the IE browser, and input http://192.168.8.1/ in address bar, as shown below: