User manual

H8951 3G SOHO Router User Manual Chapter2: Product Introduction
13
2. This product is a Class-A information product, which may cause radio interference
in living environment when being used. In this case, the users are required to take
some proper measures.
2.1.3.2 Wiring
RJ-45 - Ethernet interface
Standard 10/100BaseT Ethernet switch port, self-adaptive (hardware version>2.0)
DC - power supply interface, Galaxy H8951 3G router’s power supply is generally
+12VDC
ANT - antenna interface
The standard 5OΩ/SMA RF connector (female) is applied. In the environment of some
industrial applications, the lightning protection measures should be taken. You can
install the lightning protection device between this connector and antenna.
Note:
1. Keep this product away from any heating device;
2. Don’t place this product in dusty or humid environment;
3. Keep it away from some possible interference sources such as metal wall,
microwave oven etc;
4. To ensure that Wi-Fi network signal is received well, please pay attention to the
position and the angle of antenna. Don’t place antenna inside the shielded metal
case.
2.2 Function and features
Galaxy series 3G mobile data communication terminal product features platform and
modularization design. Upon the different demand from the users, the platform
extension, modem combination and clipping are carried out to comply with various
application demands of different clients. Combination of Broadcom hardware platform
with Linux-based GOS (Galaxy Operation System) software platform is its core
advantage.
The features of full-function Galaxy 3G mobile data communication terminal product
include:
2.2.1 Hardware function
 BCM5354 processor, 2MB flash memory, 32MB memory
 LAN port X2
 WAN port X1
 Wi-Fi 802.11 b/g
 SYSTEM, 3G+, Wi-Fi, LAN1, LAN2 and WAN indicators
 Factory default configuration restoration button