User manual

H8951 3G SOHO Router User Manual Chapter2: Product Introduction
2.1.2 Other fittings
For safe transportation purpose, Galaxy H8951 3G SOHO Router should be packaged
properly. Pease keep the packaging materials well after the package is opened for
future use in case of re-transportation.
Standard fittings
 Galaxy H8951 3G device 1 (packaged upon the order conditions)
 Wi-Fi antenna 1
 3G antenna 1
 +12V power adapter 1
 User manual 1 (CD-ROM)
 Fast user guide 1
 Certificate of conformity and warranty card 1
Optional accessories
 1.5m RJ45 cable 1
Check the amount of articles after open-package. For the specific amount, please refer
to the user order contact.
2.1.3 Device installation
Note: Please don’t install Galaxy H8951 3G SOHO Router while it is powered.
2.1.3.1 Environment requirements
The system can be used under the following conditions:
 Voltage: +12VDC
 Power consumption: 5W
 Max. working current : 350mA@+12VDC
 Idle status: 147mA@+12VDC
 Working temperature : 0~+50ºC
 Storage temperature : -20~+65ºC
 Relative humidity: 10%~95% (no condensation)
Galaxy H8951 3G SOHO Router can be placed in office, on wall or installed or fixed in
any places, without special wiring and heat radiating requirements.
To ensure the long-term and stable operation of system, grounding measures and
dust-proof measures should be taken on power supply, keep ventilation and a proper
room temperature.
Caution:
1. This system cannot be used under severe condition, such as acid/alkali
environment, strong magnetic field etc. In such environments, the normal
operation of this system cannot be ensured. Any physical damage will not be
included in the quality guarantee;