User manual

H8951 3G SOHO Router User Manual Chapter2: Product Introduction

WIFI:

WIFI working status indicator. It flashes slowly under the normal

working conditions;

LAN1~2:

LAN port 1~LAN port 2 working status indicator. It is on under

the normal network connection, otherwise is off. It flashes when

the port receives/sends data;

WAN:

WAN port working status indicator. It is on under the normal

network connection, otherwise is off. It flashes when the port

receives/sends data.

Note: After the router is powered on, LAN1~LAN2 status changes in the following

sequence: full on—full off—flash in turn—full on—full off.

Back panel interface

Galaxy H8951 3G SOHO Router’s all interfaces are designed on the back panel as shown

below:

Fig. 2.1.1-3: Back Panel

The interfaces on the back panel are described as below:

 ANT: Antenna (SMA female) interface, match with standard WI-FI antenna;

 DC: DC power supply interface (generally +12VDC power supply. During

power-on, please check whether the power supply voltage conforms to the

requirements on router label);

 DEF: Reset button. Push DEF button for about 5s with sharp article like clip to

make system reset. In this case, the system parameters reset to the factory

default settings;

 RJ45: 10/100BaseT self-adaptive Ethernet interface, LAN port (2), WAN port (1);