User manual

Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration

M80-792101-01

For example, dial a number 83890677, fill in the below code at the “Dial Script”

filed.

-----------------------------

"" at

OK atxxx

OK atd83890677

TIMEOUT 30

CONNECT ""

-----------------------------

atxxx is the modem extra command that may be used (depends on the

connected modem). It should be filled in with the connected modem parameter.

All extra AT commands should be added before dialing. In other words, all extra

AT commands should be added before the atd command.

If the telephone line is behind a PABX, it may be needed to dial a "0" and waiting

the dial tone. The atd command should be:

atd0,83890677

The COM port will try to dial the backup channel. If it fails the connection for 3

times, the router will switch back to the default routing and try another

sequence.

The route status will be displayed on the front panel LED.

 RUN LED, blinking in 1 second interval; it indicates Galaxy router

works at default route (main route).

 RUN LED, blinking in 2 second interval; it indicates Galaxy router

works at backup route.

Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration

M80-792101-01

3.2.7 Hongdian Products

Click "Start"->"Hongdian Products" menu, it displays more Hongdian products.

For more information, click the links listed at this page.

3.2.8 Logoff

Click "Start"->"Logoff" menu to exit router configuration & management pages.

You may be required to enter correct user name and password when you

re-login.

3.2.9 Firmware Update

Galaxy router is capable to update by a special update tool. You can download

the update tools and associate firmware at Hongdian website.

Visit Hongdian website at "Support"->"Software Update" section for full details;

Enter Galaxy router's "Online Help" page, click "Online Help" item to check

updates.

http://www.hongdian.com/en/download/update.htm

There are two ways to update the router firmware:

 TFTP