User manual

Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
43
 LNS: the L2TP server IP address or domain name.
 User Name: the user account created at the L2TP server.
 Password: the account password.
 Enable: tick it to take effect the client setting.
 Redial if disconnected: tick it to switch on the redial function; and
then setup the redial interval and retries.
 Use Hidden AVP's: tick it to hidden the AVP.
 Local IP Address: force the L2TP client local IP address to the
specified IP address.
 Remote IP Address: force the L2TP client remote IP address to the
specified IP address.
 Use Length Bit in Payload: tick it to use the length bit in payload.
 Authentication: Tick it accordingly.
 Default Route: tick it to route all data (except VPN tunnel) via default
routing.
PPTP Server Configuration
Click "Start"->"Route Configuration"->"PPTP Server Configuration" menu to
start this setup page to setup VPN PPTP Server parameters.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
44
 Enable VPN PPTP Server: tick it on to start the PPTP server.
 Debug Enable: tick it on to enable the debug information and record
it at Syslog.
 Speed: specify the traffic speed for the PPP daemon, the default value
is 115200 bauds.
 Local IP Address: specify the PPTP server local IP address.
 Remote IP Address: specify the PPTP server remote IP address
assignment range (i.e. 192.168.4.2-254)
Press “Add” button to create a PPTP client account at this server.
Type in the account user name and password, tick the “Enable” option; and then
save it to create and take effect the account.