User manual

Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
33
 Service Provider
 Host Name
 User ID/E-Mail
 Password/Key
You can get the information from dynamic DNS service provider after successful
application.
Dynamic DNS service provider list will be added or deleted accordingly.
SNMP Configuration
Click "Start">"Network Setting">"SNMP Configuration" menu to this setup page:
 SNMP: Enable or Disable, tick it to enable the SNMP function. It supports
SNMP V1 and V2C (V3 ready) automatically.
 Set Community: Set the community name, such as "public".
 IP: Set the SNMP management IP address. Usually, it is the router LAN
interface IP address.
 System Name: Set the router name that will display on the NMS.
 System Contact: Set the router contact name.
 System Location: Set the router location.
It may be required to save all settings and restart the router to affect it.
3.2.5 Route Configuration
Click “Start” > "Route Configuration", the below picture will be displayed.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
34
There are eight sub-menus at "Route Configuration".
 NAT/NAPT Configuration
 Security Configuration
 L2TP Server Configuration
 L2TP Client Configuration
 PPTP Server Configuration
 PPTP Client Configuration
 IPSec Configuration
 Routing Table
NAT/NAPT Configuration
NAT is the abbreviation of Network Address Translation. It maps the out side IP
address to a host or terminal in your LAN. It isolates unidentified data envelops
to guard the LAN against hacker’s attack.
Click "Start"->"Route Configuration"->"NAT/NAPT Configuration" menu to start
this setup page.