User manual

Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
25
Click "Start"->"System Tools"->"System Information" menu to start this page.
There are reference information for router software upgrading and maintenance.
The page displays router type, hardware and software version, RF module type
and series number, router series number and so on.
System Log
Click "Start"->"System Tools"->"System Log" menu to start this page.
The operation log can be recorded at four categories:
 PPP Log
 SYSTEM Log
 L2TP Log
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration
M80-792101-01
26
 PPTP Log
Click correspondence button to view the detail log information. Click the
“Setting” button to customize the log functions.
In order to save the system resources, the log default setting is disabled. It can
be enabled at the Syslog Setting page. Meanwhile, there are four options to
customize the log function, i.e. tick the PPP log Information to record the PPP
dial-up information.
The log file can be sent to a log server by specifying an IP address and port. By
Typing in the log server IP address and port to enable this function.
Restart
Click "Start"->"System Tools"->"Restart" menu to restart Galaxy router.
3.2.4 Network Setting
Galaxy router should be configured with proper parameters. Network setting is
the basic and necessary configuration. Generally, LAN interface, mobile access
parameters and dial mode should be configured.
The router LAN interface, IP address and netmask can be modified if necessary.
At the initial phase, the PC that will connect to Galaxy router should be
configured as same as the router’s IP subnet mask (192.168.8.x/255.255.255.0,
here x=2 to 254). For more information regarding the PC IP address setting,
refer to this manual Paragraph 3.1. Once your PC is set up properly, open IE
browser and input Galaxy router LAN IP address to start the configuration.
Click “Start” > "Network Setting", the below picture will be displayed.