SHENZHEN HONGDIAN TECHNOLOGIES CO., LTD.
MOBILE DATA COMMUNICATIONS Galaxy Mobile Router (H7921) Notice: Copyright The contents of the manual are protected by Chinese law, any organization and/or person can not copy this manual or part of contents without Shenzhen Hongdian Technologies Co., Ltd. authorization in written. Trademark 宏电 、 、 Hongdian, GPRS DTU, CDMA DTU, MDTU, Wireless DDN, Hongdian, Hongdian Technologies and Shenzhen Hongdian are the logos and trademarks of Shenzhen Hongdian Technologies Co., Ltd.
Abbreviations GTP-id GTP Identity HLR Home Location Register HSCSD High Speed Circuit Switch Data IGMP Internet Group Management Protocol APN Access Point Name IGRP Internet Gateway Routing Protocol APP Application IN Intelligent Network ATM Asynchronous Transfer Mode IP Internet Protocol ATM Auto Table Machine IPv4 IP version 4 AuC Authentication Centre IPv6 IP version 6 BG Border Gateway IPSEC IP Secure Protocol BGP Border Gateway Protocol ISDN Integrated Services Digit
PTM-M Point-to-Multipoint Multicast QoS Quality of Service RA Routing Area RADIUS Remote Authentication Dial In User Service RIP Routing Information Protocol RSC Register Service Center RTOS Real Time Operating System RTP Real-time Transport Protocol RTU Remote Terminal Unit RSVP Resource reSerVation Protocol SCADA Supervisory Control and Data Acquisition SGSN Serving GPRS Support Node SIM Subscriber Identify Module SMS Short Message Service SMSC Short Message Service Center SN
Contents CHAPTER 3 ROUTER CONFIGURATION ............................................................13 INTRODUCTION ...................................................................................1 3.1 CONNECTION............................................................................................................13 1.1 GENERAL .....................................................................................................................1 3.2 CONFIGURATIONS ...............................
Galaxy H7921 Mobile Router User Manual Chapter 1 Chapter 1: Introduction Chapter 1: Introduction GPRS network theoretically can provide a maximum bandwidth 171.2Kbps, actually; it works at 40~100Kbps bandwidth (it depends on service provider’s operation policy). As we know, GPRS is packet based network which provides TCP/IP communication channel. Introduction This chapter introduces the Galaxy H7921 Mobile Router general descriptions, features and philosophy. 1. 2. 3. 4. 5.
Galaxy H7921 Mobile Router User Manual Chapter 1: Introduction Galaxy H7921 Mobile Router User Manual Real time clock Chapter 1: Introduction Serial port (DB9): RS-232(DCE) or RS-485 (Optional) Serial port data rate: 300~115,200 bits/s Ethernet interface: 10/100BaseT/RJ45 (Auto sense) Configuration: WEB/Telnet or RS-232 Enhanced Features Support multiple protocol conversion Support data center and network management Online detection and redial Online/Offline control Online/Offline controlled by user’s
Galaxy H7921 Mobile Router User Manual Chapter 1: Introduction Galaxy H7921 Mobile Router User Manual Chapter 1: Introduction GPRS GPRSoror CDMA CDMA1X 1X Network Network Internet Internet GPRS GPRSoror CDMA CDMA1X 1X Network Network Internet Internet RS-232 RS-232 Serial port/Mobile network transmission It is the solution to convert and transmit non IP device data over TCP/IP based mobile data network (GPRS/CDMA 1x). Connect the non IP device to the Galaxy serial port.
Galaxy H7921 Mobile Router User Manual Chapter 2 Chapter 2: Installation Chapter 2: Installation Galaxy router should be placed on desktop, wall or any other fixed place. There is no special requirement for wiring and heating dispersion. However, it is required to place Galaxy router apart from: Installation This chapter describes the Galaxy router installation procedures, power on and initial setup. 1. 2. 3. 4. 5. 6.
Galaxy H7921 Mobile Router User Manual Chapter 2: Installation Galaxy H7921 Mobile Router User Manual Chapter 2: Installation Connectors’ description: Panels COM: Serial port (RS-232/485), serial data port or console port. RJ45: 10/100BaseT auto sense Ethernet interface. DC: DC power supply interface (+5VDC, +7.5V~+24VDC optional, check the label before power on.) RESET: Reset button, press and hold for 5 seconds to reset the Galaxy router back to its default factory configurations.
Galaxy H7921 Mobile Router User Manual Chapter 2: Installation CD RX TX DTR GND DSR RTS CTS RING 1 2 3 4 5 6 7 8 9 Chapter 2: Installation Attention! Normally, the power supply is +5VDC, +7.5V~+24VDC is optional. You should check the Galaxy router label before power on. Galaxy router should be powered by the AC adapter supplied by Hongdian. Hongdian will not guarantee Galaxy router performance if it is powered by any other unqualified AC adapter. Connect antenna properly before power on.
Galaxy H7921 Mobile Router User Manual Chapter 3 Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Router Configuration Chapter 3: Router Configuration Your PC This chapter describes the Galaxy router parameters configuration before putting it in service. 1. 2. Connection Configurations Thanks to the built-in web technology, Galaxy router can be easily configured and managed. User may be required to configure associated parameters before putting it in service.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Here, you can select “Obtain an IP automatically” or “Use the following IP address”. If Galaxy router is connected to your PC directly, it is possible to select “Obtain an IP automatically”. Galaxy router built-in DHCP server will assign an IP address to the connected PC. Sometimes, the PC may be required to restart.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration The new add address should be limited at the subnet same as the Galaxy router, i.e. 192.168.8.xxx (xxx is the number from 2 to 254). Subnet mask should be 255.255.255.0; and then click “Add (A)” button to add the address and subnet into your PC. Your PC will be configured at the IP address “192.168.0.xxx” and “192.168.8.xxx”. Click “OK” to complete configuration.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Main Menu Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Console Mode Router Status: Display major parameters configuration and operation information. Online Help: Provide online help. System Tools: Provide a set of tools for the router management, such as modifying password, remote management, profile backup, hardware & software information, log and restart tool.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration 3.2.2 Online Help Click “Start”->"Online Help", a new windows will be opened, and the below webpage picture appears. Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Configuration Profile Mobile Network Testing System Information System Log Restart Router Administration Click "Start"->"System Tools"->"Router Administration" menu to start this setup page.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration The remote management port can be changed, and also the timeout period can be specified. When the webpage access port is changed, LAN side management webpage access port is changed as well. Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Mobile network testing function is a useful troubleshooting tool to locate the problem on mobile network.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Click "Start"->"System Tools"->"System Information" menu to start this page. Chapter 3: Router Configuration PPTP Log Click correspondence button to view the detail log information. Click the “Setting” button to customize the log functions. In order to save the system resources, the log default setting is disabled. It can be enabled at the Syslog Setting page.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Default DNS: Configure the DNS server IP address, there are three DNS server can be defined. It can be modified in accordance with application requirement. Press "Save" button to store the modification. Reconnecting the host (or PC) after its IP address has been modified successfully.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration GPRS: *99***1# (for China Mobile) CDMA 1x: #777 (for China Unicom) User Name and Password Input a correct user name and password provides by local mobile service provider; it will be required for dialing authentication: For China Mobile's GPRS CMNET user, no user name and password required. APN user should input correct information provide by service provider.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Local IP address is the Galaxy router IP address obtained from mobile network. Remote IP address is GGSN or PDSN IP address. Set Netmask Specify the Netmask. PPP options Disable Disable Disable Disable Disable Protocol Field Compress Address/Control Compress Compress Control Protocol the connection-ID Compress Van Jacobson Style TCP/IP Header Compress Try those settings to adapt mobile network.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Service Provider Host Name User ID/E-Mail Password/Key You can get the information from dynamic DNS service provider after successful application. Dynamic DNS service provider list will be added or deleted accordingly.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration At default setting, the network behind Galaxy router is isolated from outside network to provide safety for the hosts. For SOHO application, you may need to setup your own WEB/FTP or other kinds of service; NAT (Network Address Translation) /NAPT (Network Address Port Translation) technology can meet your requirements. With this setting, the outer source ports can be mapped to a specified a host at the LAN side.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Common used ports list: Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Security Configuration Protocol Service Port TCP AFP over TCP 548 TCP AOL 5190~5194 TCP BGP 179 UDP DNS 53 TCP FINGER 79 TCP FTP 21 TCP GOPHER 70 TCP HTTP 80 TCP HTTPS 443 UDP IKE 500 TCP POP3 110 TCP PPTP 1723 With the security configuration function, you can control data envelops security in/out yo
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration For each policy, there are following items can be defined. Protocol: TCP, UDP, ICMP or All selectable. Source IP address/Netmask: Define source data envelops IP address and subnet. Source port: Define source data envelops port. Destination IP address/Netmask: Define destination data envelops IP address and netmask.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Enable VPN L2TP Server: Tick it to start L2TP server Allocate from this IP range: Define the server IP address assignment range for L2TP client. These can connect as LAC's: Define the IP address range for the L2TP client that can be connected. Local IP to use: The local IP address for the L2TP server. Report this as the Hostname: The L2TP server host name. Only permit one tunnel per host: Tick it to limit the tunnel connection.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration LNS: the L2TP server IP address or domain name. User Name: the user account created at the L2TP server. Password: the account password. Enable: tick it to take effect the client setting. Redial if disconnected: tick it to switch on the redial function; and then setup the redial interval and retries. Use Hidden AVP's: tick it to hidden the AVP. Local IP Address: force the L2TP client local IP address to the specified IP address.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration PPTP Client Configuration Click "Start"->"Route Configuration"->"PPTP Client Configuration" menu to start this setup page to setup VPN PPTP Client parameters. Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration IPSec Configuration (N/A for this version) Click "Start"->"Route Configuration"->"IPSec Configuration" menu to start this setup page.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration For Example: Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration 3.2.6 Special Setting (N/A for this version) Galaxy router is not only integrated with router functionality, but also can be configured for many other applications. The Special Setting function is designed for industries and utilities. Several parameters can be configured accordingly.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration For many applications, it requires to keep the links always online. The heartbeat setting should be set to keep the links alive. However, the heartbeat is the data traffic packets and it may be charged (depends service provider). You have to set a right heartbeat interval in accordance with application.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration If the serial port is enabled, the DSC IP address or domain name must be specified. Interface Select serial port interface type: RS-232 or RS-485; RS-485 is not available at this version hardware.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration COM Port Setting: Before enabling this function, it is required to connect a dial-up modem (ie. V.90 modem) to the Galaxy router’s COM interface. A special cable will be needed. The cable wiring is showed at the below diagram. RS-232 Modem RS-232 DB9 (Male) CD RX TX DTR GND DSR RTS CTS RING This function can be "Enable" or "Disable".
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration For example, dial a number 83890677, fill in the below code at the “Dial Script” filed. Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration 3.2.7 Hongdian Products ----------------------------"" at OK atxxx OK atd83890677 TIMEOUT 30 CONNECT "" ----------------------------- Click "Start"->"Hongdian Products" menu, it displays more Hongdian products. For more information, click the links listed at this page.
Galaxy H7921 Mobile Router User Manual Chapter 3: Router Configuration Galaxy H7921 Mobile Router User Manual Chapter 4: Operation Instruction Hongdian Update tool Chapter 4 TFTP update H7921 is built-in with a tftp client. Operator can update the firmware via a TFTP sever. The latest version H7921 firmware has the tftp feature included. Download the tftp server at: Operation Instruction This chapter introduces Galaxy H7921 router operation introductions. 1. 2. 3.
Galaxy H7921 Mobile Router User Manual Chapter 4: Operation Instruction 4.2 Operation Galaxy router is an embedded hardware and software platform. Normally, it is working without any manual operation. It provides a reliable and flexible data channel for industrial applications. Galaxy H7921 Mobile Router User Manual Chapter 4: Operation Instruction (Note: Galaxy router’s LINK and PC’s Link should lights-up if it is connection). Check your TCP/IP setting. (Note: If the Galaxy router LAN IP is 192.168.8.
Galaxy H7921 Mobile Router User Manual Appendix 1: Hypertext Terminal Setting Galaxy H7921 Mobile Router User Manual Appendix 1: Hypertext Terminal Setting The COM port parameters should be specified. Select COM number (i.e. COM2), Bites per second, Data bits, Parity, Stop bits and and Flow control. Appendix 1: Hypertext Terminal Setting This Appendix introduces Microsoft Windows HyperTerminal setup instruction. 1. 2. 3. 4. COM Port Setting Properties Codec Setting ASCII Code 1.
Galaxy H7921 Mobile Router User Manual Appendix 1: Hypertext Terminal Setting Galaxy H7921 Mobile Router User Manual Appendix 1: Hypertext Terminal Setting 4. ASCII Setup Click “ASCII Setup” button, set ASCII parameters. 3. Host System Encoding Method Click “Input Translation” button, set host system encoding method.
Galaxy H7921 Mobile Router User Manual Appendix 2: Firmware Update Tool Galaxy H7921 Mobile Router User Manual Appendix 2: Firmware Update Tool Appendix 2: Firmware Update Tool This appendix describes Galaxy router firmware update tool user instructions. Galaxy H7921 Firmware Update Tool Set up the PC IP address subnet same as the router that will be updated. Copy the Router Update Tool to the PC and run it (Fig. 1): Fig. 3 Fig. 4 Press “Update” button to update the router firmware (Fig. 5) Fig.
Galaxy H7921 Mobile Router User Manual Appendix 2: Firmware Update Tool Warning 1. Do not disconnect or power off the router during firmware updating. 2. Mobile network may be failed sometimes; it is a high risk to update firmware remotely.
