User's Manual

1, Turbo Function: press and hold a motion button to activate the skill continuously (After the successful setting, the
LED light will flash when you press the Motion button)
A,Setting Steps: long press “turbo” button and any button for 2 seconds simultaneously . them release “turbo”
button t( X,口,○，△,L1,L2.R1,R2）
B， Auto turbo steps: Repeat the above steps A
C, Cancel the Setting: Repeat the above steps to cancel the turbo function.
2,MIC Switch
To turn on or turn off microphone function Mic fuction can be used only in PS4 mode.
3,Registering (pairing) the controller
The first time you use the controller, or when you want to use the controller on anther playStation
○
R
4 system, you
must perform device registration (pairing). Turn on the PS4
TM
system and connect the controller to the system with the
USB cable to complete device registration.
To a USB port on the PS4
TM
system
USB cable (supplied with the PS4
TM
system)
4,PC mode
Plug the USB conector into the USB port of your computer, the micro connector connect gamepad charging Dock
For the first time ,it takes about 30-30S to install driver ,automatically after the successful installation it starts to
serve.
For the special buttons
1，Long press the turbo key for 5s，Then the LED turn green；press any one special buttons ;the LED flash
2，press one of X,口,△,O the LED turn off；the special buttons setting ok
Cancel the special buttons
Long press the turbo key for 5s，Then the LED turn green；press you want to cancel the special buttons twice ;the LED
Turn off , the special buttons cancel OK.