User's Manual

goes out, and then unplug the AC power cord from the outlet.

Option of information language

When the projector is turned on for the first time, the default language is Chinese.

If you need to change the language, you will be subjected to the following steps (the

operating steps of projector and remote control are consistent):

1. Press “Menu” button;

2. Press“▲” or “▲” button to select the “Machine setting 1”, and then

press “Menu” button;

3. Select your desired language and press “Menu” button to confirm.

Option of input source

When you start the projector, the input source used before the last shutdown will

be the first choice and you can operate the following steps to select other input

sources:

1. Press “Source” button;

2. Press “▲” or “▼” button to select the name of input source you want,

and then press “Enter” button to confirm.

Keystone correction

When there is a certain angle between the projector and the screen or white wall,

the top and bottom lengths of projected image are different. This phenomenon is

known as “keystone”. This projector is equipped with manual keystone correction

function so that the shape of projected image is tidy. As follows: