User Manual

14
Vˊ
ˊ
Interactive System Building
1. Make sure the whiteboard is firmly fixed before building the interactive
system.
2. Adjust the positions of the projector and whiteboard to make sure
images are projected to writing area of the whiteboard in full screen.
3. One corner of the whiteboard is set with USB port(position of USB port
will be varied in different models). Plug the USB cable into the USB port.
The USB cable in the accessory box is designed for this whiteboard.
Normal USB cable might not be compatible to this whiteboard.
4. Connect the USB cable to the USB port in the computer.
5. Connect the computer and projector (You can refer to the projector User
Manual for more details).